ToneJointing, its everything we say it is and more
Category:
Tone Woods
By:
Earcandy ™ -
February 11th, 2007
This has been read:
3894 times.
Tonejointing™ Is
The Best and Most advanced Jointing process in the instrument industry today. Finger Dovetail pocket and alike jointing are a design of the past. A good one, But we design every aspect of our tone and sound. This far surpasses old style jointing in every aspect.
We have spent a very long time and lot's of money to engineer our jointing process never seen before in the instrument enclosure industry. Finger and Daido jointing allow for cabinet flex or what has been known as "box talk".
Box talk happens when sound pressure levels inside the cabinet apply enough pressure to push or put stress on the cab jointing. This allows the cabinet to flex in unison with the speaker polarity, thus creating muddy undefined and slow attacking bass and a over all sloppy tone.
Oval back cabs create a bigger problem in the fact that they allow compression to un-evenly escape the cab from the back, opposite of where you need it and in a uneven resisted pattern.
Even at low volume levels, this flex and resistance can greatly increase the amount of work your speaker has to do to sound good.
Our cabs are built in a way that uses the compression and spl from the speakers in a positive way that actually forces the cab jointing together and not apart, so the louder you want to play, the tighter and more defined the cab will sound, offering no resistance or flex allowing for the most pure UN interrupted tone from a cab you have ever had!
EarCandy ported cabs are heavily braced on all 4 sides attached at 32 points no further than 5 inches from each other all the way around the cab (imagine a drum rim with drum lugs) The attachment points are then tightened until all of them reach the exact same tinsel strength, meaning you can strike the cab on any side or any corner and it will ring true, in the same tone all other sides ring in, very much like tuning a drum. What this means is, there is NO loose or UN attended to portions of the cab that will resonate more or less than another part (thus no dead spots in the cab, thus no box talk). Creating a 110% pure and true completely even delivery of any tone, combine that with our Glue, Tone woods and your options and versatility is unlimited!.
This also makes the cab basically one piece and almost indestructible. This is all done from inside the cab allowing the sound to travel away from the hardware and not INTO it (allowing free and clear travel of sound). So, when taking 11 years to develop such a instrument for your instrument, why stop at that? So we use THE BEST hardware, speaker cable , Covering, grill material, etc etc etc we can find. Guaranteeing you this will be the last cab you will need for a long long time. This is intellectual property of Earcandycabs and is registered with a pat pending. All right reserved EarCandyCabs 2003
